When I open the drain plug (supposedly the lowest point in the system) only a little drip of brown water is coming out, but when I undo the actual radiator valve that I'm trying to replace, loads clean water gushes out! The header tank is empty and stop-cock closed, so no fresh water can be entering the system. What am I doing wrong?
CH drain down nightmare
- Thread starter madmike
- Start date
Sponsored Links
The little rubber washer that seals the drain point has stuck shut.
Take right out and see if you can clear, if not, switch off both sides of a rad, uncouple one end, drain rad, attatch a hose to the rad valve using a fitting and drain through that.
Take right out and see if you can clear, if not, switch off both sides of a rad, uncouple one end, drain rad, attatch a hose to the rad valve using a fitting and drain through that.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
