I am replacing an 500x 1100 towel rad that had a bad design with thin fins - edge on mounted on the front of the uprights which meant that the resulting holes from uprights to fins mist of been about 5mm diameter. So not good for getting full flow to the top.
When the towels are on it it means that there is not a lot left doing any actual heating in the bathroom 2x3m.
I am thinking of fitting a 500x1800 so that there is empty rad rails doing some heating above the towels.
Finally ------- the question.
Will my system have any issues with the extra EXTRA tall rad.
Unvented brand new 5 years old refit and designed to run 13 rads which it has done perfectly apart from the crappy bathroom one
Grundfos 15-60 130 pump
When the towels are on it it means that there is not a lot left doing any actual heating in the bathroom 2x3m.
I am thinking of fitting a 500x1800 so that there is empty rad rails doing some heating above the towels.
Finally ------- the question.
Will my system have any issues with the extra EXTRA tall rad.
Unvented brand new 5 years old refit and designed to run 13 rads which it has done perfectly apart from the crappy bathroom one
Grundfos 15-60 130 pump