! inch chrome stop end

[Faz2726]

As above i am after a 1 inch 25mm chrome stop end to cap off a shower on a mixer bath tap. Any help will be great
Cheers Ben

 

[seco services]

that sounds more like a 3/4" bsp if your measuring it across the diameter.

 

[Faz2726]

might be i just measured the diameter, so u reckon its 3/4?

 

[seco services]

yep.

 

[ChrisR]

A stop end goes on a pipe
a cap goes on a male thread
a plug goes into a female hread

I suspect you need a Cap and rubber washer, 1/2" bsp, if it's for where a standard shower hose would screw on.

HAven't found a chrome one, but this one is stainless steel:
http://www.bes.co.uk/products/graphics/14495.gif

Here's one, no pic...
http://www.tradingdepot.co.uk/DEF/p...ittings/Chrome Fittings/Chrome Brass Cap 1/2"

 

[Faz2726]

not sure what to go for now 1/2 or 3/4 , i have measured the threaded portion on the mixer tap at 1 inch? will this do it ?

http://www.twenga.co.uk/offer/5802/7986951584728756503.html

 

[seco services]

yes you'll need a rubber washer to go with it.

going by your measurments its a 3/4". but if its what the shower hose screws to its a 1/2".

so can you tell us more or give us a pic ?