I have a problem with my Crosswater/SOL (RV1102RC cartridge) shower mixer. The further the temp control is turned towards warm/hot, the lower the pressure drops (extremely). When set at 38 or above the output is barely a trickle. If turned fully clockwise pressure is very high (cold water).
No other demand for hot water is in use while this shower is operated.
Thinking it was the cartridge I have replaced this with a new one but the problem remains the same.
The shower is run off a combi boiler. I have another mixer shower upstairs at the same level running off the same boiler with no problems whatsoever.
I'd be grateful for any shared knowledge on this one.
No other demand for hot water is in use while this shower is operated.
Thinking it was the cartridge I have replaced this with a new one but the problem remains the same.
The shower is run off a combi boiler. I have another mixer shower upstairs at the same level running off the same boiler with no problems whatsoever.
I'd be grateful for any shared knowledge on this one.