I have installed a mixer shower to our bathroom but the hot water pressure isn't good enough to make it work correctly. Can anybody tell me if I can fit a pump just to the hotwater as the cold is fine. Both hot and cold are spurred of from the pipes that supply the bath taps. We have a hot water tank that is on the landing therefore not above the shower but the cold water tank is in the loft. Do I need to but a pump on both or just the hot ? Any help would be greatly appreciated. [/b]
Poor shower pressure
- Thread starter kevin68
- Start date
Sponsored Links
sounds like your running cold mains hot gravity.
you need to have both supplies with equal pressures
easiest way is to supply both from the cylinder and cws and add a twin pump saves getting alot of problems later on.
you need to have both supplies with equal pressures
easiest way is to supply both from the cylinder and cws and add a twin pump saves getting alot of problems later on.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
