hi folks need some help on this one,just fitted a triton shower pressure light keeps showing up although pressure is good,i can only get cold water,phoned triton they said check filter but still no good,any suggestions please.
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
triton shower faulty
- Thread starter thomglasgow
- Start date
B
breezer
phone triton tomorrow again?
since it is they who make it and should know its limitatione etc
since it is they who make it and should know its limitatione etc
I have the same problem with a topaz 100si,
We have low pressure round here.
1, try the filter.
2, fill a measured container of water whilst using a stop watch to gauge the amount of flow your getting.
3, ring your water company to get them to do a pressure test.
triton showers minimum pressure is 1bar, any less and the LP warning light will be displayed. its a safety feature to protect your new purchase
We have low pressure round here.
1, try the filter.
2, fill a measured container of water whilst using a stop watch to gauge the amount of flow your getting.
3, ring your water company to get them to do a pressure test.
triton showers minimum pressure is 1bar, any less and the LP warning light will be displayed. its a safety feature to protect your new purchase
Just had triton out to look at the unit and they have fitted a bent bit of plastic on the microswitch.
now we have a working shower.
now we have a working shower.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
