I'm after some replacement door handles for two UPVC doors however I'm struggling to find any suitable ones. The problem is the depth profile of the existing handles, which are 10mm on one door and only 8mm on the other - most of the replacement handles I can find are 12mm deep.
The handles have a standard 92mm spindle-barrel spacing with 122mm screw centres (both screws are below the handle).
I'm aware I could replace the lock barrels with different lengths to accommodate 12mm deep handles however I've just replaced them with high quality barrels (in hindsight the handles should have been swapped first) so I want to avoid this if possible.
Can anyone point me to some handles?
The handles have a standard 92mm spindle-barrel spacing with 122mm screw centres (both screws are below the handle).
I'm aware I could replace the lock barrels with different lengths to accommodate 12mm deep handles however I've just replaced them with high quality barrels (in hindsight the handles should have been swapped first) so I want to avoid this if possible.
Can anyone point me to some handles?
