Hi all, I'm going to wallpaper a chimney breast which is set at 45 degree angle in the corner of a room. The previous room I completed had the same arrangement, but the fireplace was located in the centre of the chimney breast wall and so I had three drops, the middle one running dead central to the fireplace. In this room the fireplace is offset by about three inches and so I'm unsure what is the correct option is. Do I again run a drop central to the fireplace with another drop each side of that and a further three inch drop on the wider side of the fireplace or should I use just three drops which line up centrally on the chimney breast?
Thanks in advance for any advice!
Thanks in advance for any advice!