Whirlpool Bath Spares?

[ncollins]

Our bath is a 'whirlpool' bath bought from Bathstore.com about 5 years ago. Unfortunately the intake got blocked and caused some rather explosive damage to the plastic unions on the pump intake and outlet!

I've managed to dismantle the offending items but need to find spares to replace them. Bathstore have been less than helpful and I can't find out the manufacturers name but I assume that these sorts of plastic unions and pipes must be available somewhere? I realise that I'll need to solvent weld the intake union to the intake pipe but the outlet union is attached to an unusually shaped T Piece.

Does anyone know who would have manufactured whirlpool baths for Bathstore about 5 years ago or a supplier that specialises in this sort of thing?

Nic

 

[Elkato531]

This is typical of suppliers like bathstore I am afraid. They employ mainly salespeople who are not incentivised to spend time finding information on old products when they would much rather sell you something new. They must keep records of who was supplying them with what products over the years. I would keep on at them and demand to speak to someone further up the chain. Good luck.

 

[Nige F]

Just google . don`t waste your time with BS

 

[GraemeL]

Got similar problem only in my case the flanges on the unions have disintegrated and pipework has separated - not good! Did you have any luck sourcing replacement parts anywhere?

 

[ncollins]

Yes, I managed to get the spares from [email protected]

 

[longdogs]

http://www.whirlpoolexpress.co.uk/a...l-parts-spare-parts-whirlpool-components.html

Any good?