Zanussi WJS1265W problem

[tugchief]

Hi, My problem is everytime the wife uses the tumble dryer feature we get the error code e20.

I have had a look at both of the pumps and they are free from any debris also checked filter also ok , no kinks in any pipework etc.

Had a look at the thermal overload not tripped.

Where do I look next solenoid valves ? if so can these be tested prior to spending any money?

Also even though the pump seems ok clear and springy should I check the continuity aswell?

Any help would be mosy appreciated especially with this weather and to get in the wifes good books!

Regards

Simon

 

[assuhors]

Check the condenser probably blocked.

 

[tugchief]

Thanks for the reply where is the condensor located under the top cover or at underneath?

 

[assuhors]

Try following previous instructions from here. http://www.diynot.com/forums/viewtopic.php?p=634255#634255

 

[tugchief]

Thanks for the advice condenser was full of crud all cleaned out and working perfectly now.

One happy wife what more could i ask for lol