> > >

Order by: Relevance
Price: Low to High, High to Low


Image of Priory 310 Hexagon Scaffold Spanner Whitworth 7/16" Round Steel Socket Priory 310 Hexagon Scaffold Spanner Whitworth 7/16" Round Steel Socket

This single-ended spanner has a swing over handle, hardened hex whitworth socket and a bright zinc plated finish.Length: 230mm.Size. 7/16 WAdditional Information:Type: Single-EndedSize: 7/16 W...

 £9.95
More Information
Image of Priory 6 Piece Parallel Pin Punch Set Priory 6 Piece Parallel Pin Punch Set

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Walleted set of 6 containing...

 £21.95
More Information
Image of Priory 6 Piece Long Parallel Pin Punch Set Priory 6 Piece Long Parallel Pin Punch Set

Hexagonal bodied parallel pin punches with extra long pins. Used for driving out long retaining pins. The pin should be first started with a hand or taper punch to avoid damage to the point of the pin punch. Pin length: 63mm (2.1/2in).

 £25.95
More Information
Image of Priory Square Head Centre Punch 1/8" Priory Square Head Centre Punch 1/8"

Priory 44 Series Centre Punch with a square head which gives a good striking area and prevents the punch from rolling. Its precisely knurled body provides a firm grip. Heat treated for long life.Size 3mm (1/8 in).Length 100mm (4 in)

 £4.49
More Information
Image of Priory Parrallel Pin Punch 5/32" Priory Parrallel Pin Punch 5/32"

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 4.0mm (5/32 in)

 £3.95
More Information
Image of Priory Nail Punch 1/32" Priory Nail Punch 1/32"

Priory 66 Series Nail Punch with a square head that provides a large striking area, it also stops the punch from rolling off the bench. Its precisely knurled body provides a firm grip. Designed to drive nail heads below the surface of the wood.

 £4.49
More Information
Image of Priory Scaffold Key Priory Scaffold Key

This Priory Scaffold Key is produced with a cranked taper square podger for use on eyebolts, jacking collars and loop fixings. It has a hook at one end and a square at the other both are hardened and tempered to improve tool life.Lengt...

 £9.95
More Information
Image of Priory 127 Engineers Scriber Priory 127 Engineers Scriber

This Priory Engineers Scriber is a one piece constructed scriber for marking all metal. Its knurled body gives a positive finger grip and the sharp ground points are heat treated to give a long life.Size: 125mm (5 inch)Additi...

 £3.95
More Information
Image of Priory 4 Piece Centre Punch Set Priory 4 Piece Centre Punch Set

Priory 44 Series Centre Punch with a square head which gives a good striking area and prevents the punch from rolling. Its precisely knurled body provides a firm grip. Heat treated for long life.Walleted set of 4 containing one of each of t...

 £16.95
More Information
Image of Priory Rivet Set Set-Up and Snap 5/32" Priory Rivet Set Set-Up and Snap 5/32"

Manufactured from heat-treated tool steel, this dual function tool is used firstly to set the rivet up and then to form the head.Size 4 x 125mm (5/32 x 5 in).Additional Information:Size (mm): 4.0 x 125mmSize (inch)...

 £9.95
More Information