Priory 66 Series Nail Punch with a square head that provides a large striking area, it also stops the punch from rolling off the bench. Its precisely knurled body provides a firm grip. Designed to drive nail heads below the surface of the wood.

Manufactured from heat-treated tool steel, this dual function tool is used firstly to set the rivet up and then to form the head.Size 2.5 x 115mm (3/32 x 4 3/4 in).Additional Information:Size (mm): 2.5 x 115mmSize ...

Priory 66 Series Nail Punch with a square head that provides a large striking area, it also stops the punch from rolling off the bench. Its precisely knurled body provides a firm grip. Designed to drive nail heads below the surface of the wood.

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 3/32in.Additi...

This Combination Podger Scaffold Spanner has a hardened and tempered handle which has a tapered square end suitable for use on scaffold eye bolts and hex whitworth sockets.Length: 250mm.Size 7/16 in Whitworth.Additional Info...

Hexagonal bodied parallel pin punches with extra long pins. Used for driving out long retaining pins. The pin should be first started with a hand or taper punch to avoid damage to the point of the pin punch. Pin length: 63mm (2.1/2in).

Hexagonal bodied parallel pin punches with extra long pins. Used for driving out long retaining pins. The pin should be first started with a hand or taper punch to avoid damage to the point of the pin punch. Pin length: 63mm (2.1/2in).

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 3.2mm (1/8 in).

Priory 44 Series Centre Punch with a square head which gives a good striking area and prevents the punch from rolling. Its precisely knurled body provides a firm grip. Heat treated for long life.Size 1.5mm (1/16 in).Length 100mm (4 in...

A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 4.8mm (3/16 in)....