For use when removing and installing sprockets and cassettes. A chain whip, also known as a sprocket remover or a sprocket holder, is used to hold the cogs on the rear wheel in place as a lockring tool is used to undo the cassette in the opposite direction.

Required for tightening or loosening spoke nipples a spoke wrench, sometimes referred to as a spoke key, allows for the tension in the wheel spokes to be adjusted so that the wheel runs straight and true. The LTR spoke wrench has been designed to be comfortable...

Folding tool kit including a range of essential tools to carry out most road and trail side repairs. The ultra slim size of this alloy multi-tool means that it will easily fit into any saddle bag, back pack, or pocket

Designed to access the narrow spaces behind the chainset, this low profile chainring nut spanner holds the nut still to prevent it from turning when tightening or loosening the chainring bolt using a Hex or Star key.

Ideal for use when fitting or adjusting brake cables, these cable pullers act as an extra pair of hands to grip and hold a cable in position whilst the pinch bolt is being tightened. The thumb lock allows for one-handed operation, helping to ensure the...

Designed to keep bars steady and inline while carrying out maintenance on a bicycle. This handlebar holder is ideal for when the bike is being hung in a workstand. By hooking over both the top tube and the bars it prevents the front of the bike from turning...

Allows for the quick and easy installation of press fit bottom brackets without risking damage to the frame. The stepped plates clamp either side of the axle allowing the force screw to be turned, pressing the bearing cups into the bottom bracket shell....

This star nut setter is required for installing new star nuts into threadless fork steerers to the required depth and at a straight angle first time. As it is for use with a dead blow hammer, the handle has been designed to help protect the users hand

Combines a 15mm pedal wrench for removing the pedals on the majority of most modern bicycles, 16mm box spanner, and a chain whip for use when removing and installing sprockets/cassettes. Also known as a sprocket remover, the chain whip holds the cogs...

A 15mm pedal wrench, with super slim profile and long handle, for removing pedals on most modern bicycles. It's slim enough to fit comfortably between the pedal body and crank arm, minimising marking or damage to the pedal arm. The long handle, with comfort...