|
Trend Mortise Router Cutter 12.7mm 50mm 1/2"
TCT cutter with staggered cutting surfaces. Deep mortising and grooving giving good chip clearance. For lock mortising, two width cuts will be needed to achieve the standard 19mm mortise. Specifications: • Shank Diameter: 1/2 ... |
£71.95 More Information |
|
Trend Bearing Guided Architrave Router Cutter 40mm 29.5mm 8mm
Self guided for modern architrave & skirting. Specifications: • Shank Diameter: 8 mm • Dia Metric: 40 • Cut Length Metric: 29.5 • Overall Length Metric: 74.3 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 9... |
£74.95 More Information |
|
Trend T Slotter and Slat Wall Cutter 35mm 9.5mm 3/8"
A range of heavy duty 'T' slot cutters for clamping and hanging applications. Relief cut required. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Dia2 Metric: 12.7 • Cut Lengt... |
£76.95 More Information |
|
Trend Matchlining Bearing Guided Router Cutter Set 47mm 11mm 1/2"
A complete cutter set for producing matchlining. Jointing parts are interchanged on the arbor to change the mode of the cutter. Specifications: • Shank Diameter: 1/2 • Dia Metric: 47 • Cut Length Metric: 11 • Over... |
£152.95 More Information |
|
Trend Eccentric Single Flute Router Cutter 6.3mm 10mm 1/4"
Cutter is turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions. Offers better plunge cutting characteristics than TCT. Many more re-sharpenings can be obtain... |
£55.95 More Information |
|
Trend T Slotter and Slat Wall Cutter 30mm 4mm 3/8"
A range of heavy duty 'T' slot cutters for clamping and hanging applications. Relief cut required. MEC mechanical feed only. Specifications: • Shank Diameter: 1/2 • Dia Metric: 30 • Dia2 Metric: 10.5 • Cut Leng... |
£76.95 More Information |
|
Trend Eccentric Single Flute Router Cutter 3mm 11mm 1/4"
Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Small diameter tools must be handled with care to avoid breakage. Sing... |
£35.95 More Information |
|
Trend CRAFTPRO Intumescent Recesser Bearing Guided Router Cutter 40mm 20mm 1/2"
Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door. To suit 4mm thick strip of 20mm width. Intumescent strip is used to create an effective barrier to both fire and smoke. Choose alternati... |
£87.95 More Information |
|
Trend Bearing Guided Undermount Bowl Bevel Router Cutter 32mm 25mm 1/2"
Especially designed bevel cutter for routing Corian and similar luxury 'marble like, material which is used in many bathrooms and kitchens. Designed to trim surface to an undermount bowl. Specifications: • Shank Diameter: 1/2 &bu... |
£101.95 More Information |
|
Trend Down Cut Shear Two Flute Router Cutter 12.7mm 38mm 1/2"
Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming veneer finishes & laminated boards. Down cut feature stops break out on top edge. Has a 4 de... |
£49.95 More Information |
