|
Trend Drawer Pull Router Cutter 44.8mm 25.4mm 1/2"
An initial cut with a straight cutter is required to produce the drawer pull profile. Specifications: • Shank Diameter: 1/2 • Dia Metric: 44.8 • Dia2 Metric: 24 • Cut Length Metric: 25.4 • Overall Length Metric... |
£126.95 More Information |
|
Trend Router Drill Countersunk Counterbore 12mm 20mm 1/4"
For abrasive materials. Tools will drill, countersink and finally counterbore a parallel hole. Designed to receive plug produced by maker Ref. 24 group. The drill diameter sizes are for a clearance hole only. Specifications: • Shank D... |
£69.95 More Information |
|
Trend Through Hole Router Drill 5mm 37mm 1/4"
V point through hole slow spiral TCT drills can be used in drilling machines or portable routers. Tungsten Carbide Tipped for long life. Router drilling ensures hole is perpendicular to surface. Specifications: • Shank Diameter:... |
£28.95 More Information |
|
Trend PCD Serviceable MDF Router Cutter 19.1mm 25.4mm 1/2"
Polycrystalline Diamond tipped cutter gives a significant increase in tool life compared to TC tooling. PCD also gives an accuracy of cut throughout the tool life and faster feed rates as well as reduced downtime. Use in fixed head, NC or CNC ... |
£372.95 More Information |
|
Trend CRAFTPRO Bearing Guided Biscuit Jointer Set 4mm 37.2mm 1/4"
Trend Craft Pro 1/4in shank bearing guided biscuit cutter - 37.2mm diameter Two Flute Carbide tips. Two flute carbide TCT tips for cutting biscuit slots in timber and timber based materials. Supplied with three interchangeable bearings covering... |
£46.95 More Information |
|
Trend WS Plug Maker 3/8" 1/2"
Precision made Carbon Steel plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. High precision CNC ground flutes for improved quality of cutting edge geometry and precise diamet... |
£86.95 More Information |
|
Trend TRADE Bearing Guided Intumescent Router Cutter 10mm 40mm 1/2"
For 4.0mm thick strip. For 10.0mm wide intumescent strip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 40 • Cut Length Metric: 10 • Overall Length Metric: 62 • Bearing Dia Metric: 32 • Rebate Metri... |
£57.95 More Information |
|
Trend Eccentric Single Flute Router Cutter 9.5mm 25mm 1/2"
Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccent... |
£36.95 More Information |
|
Trend Up Down Shear Router Cutter 12.7mm 54mm 1/2"
Tungsten Carbide Tipped. Two flute cutter with tips sheared up and down, giving a fine finish. For trimming veneered and double-faced boards, plywoods and natural timbers. These cutters have the action of pushing the chips towards the midd... |
£70.95 More Information |
