|
Trend TRADE Bearing Guided Trimmer Router Cutter 12.7mm 50mm 12mm
For trimming and bevelling timber, lippings and plastic laminate edges. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. C... |
£56.95 More Information |
|
Trend Bearing Guided Trimmer and V Groover Router Cutter 16mm 25.4mm 1/4"
Two flute. For trimming of laminate and solid lipping. 1.6mm deep 'V' groove to hide glue line. Specifications: • Shank Diameter: 1/4 • Dia Metric: 16 • Dia2 Metric: 12.7 • Cut Length Metric: 25.4 • Cut... |
£35.95 More Information |
|
Trend Combi Trimmer Bearing Guided Router Cutter 24mm 6mm 1/4"
A self-guided combination trimmer. A 90 degree trim is obtained by engaging the bottom half. A 45 degree trim is obtained by lowering the cutter. A fine height adjuster is recommended when using this cutter. A larger 20mm bearing will... |
£63.95 More Information |
|
Trend Bearing Guided Bevel Trimmer Router Cutter 15.9mm 6.3mm 1/4"
Gives a smooth bevel finish for laminates and other materials. Bearing follows the board beneath. Specifications: • Shank Diameter: 1/4 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 6.3 • Cut Leng... |
£29.95 More Information |
|
Trend CRAFTPRO Bearing Guided Bevel Trimmer Router Cutter 34.9mm 10mm 1/4"
Two flute cutters for producing extra clean cut bevelled edges. No plunge cut. Specifications: • Shank Diameter: 1/4 • Dia Metric: 34.9 • Dia Imperial: 1 3/8 • Cut Length Metric: 10 • Cut Length Imperial: 2... |
£35.95 More Information |
|
Trend Combi Trimmer Router Bit 12.7mm 12.7mm 1/4"
For trimming top & lip. Economical cutters, perform 3 functions: 1. To top trim the overlay at 90 degrees. 2. To trim the overlay at 45 degrees or 60 degrees. 3. The base of the cutter can trim the vertical lipping at 90 degrees. Requ... |
£33.95 More Information |
|
Trend Guided Economy LaminateTrimmer Router Cutter 6.3mm 10mm 1/4"
Trend 6.3mm diameter Solid Tungsten Carbide Trimming Cutter - 1/4in shank, 10mm cut depth. Economy cutter made from Ultra-durable Solid Tungsten Carbide construction for increased performance and strength. Self guided designed nose the run agai... |
£40.95 More Information |
|
Trend Four Flute Double Bearing Guided Trimmer Router Bit 19.1mm 50mm 1/2"
Four fluted TCT trimmer/profiler. Super fine finish. Ball bearings fitted to both nose and shank. Allows templates to be placed either on top or the bottom of the material, for ease of routing. Allows for irregular grained timber to be ... |
£101.95 More Information |
|
Trend Bearing Guided Trimmer Router Cutter 19.1mm 50mm 1/2"
Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy p... |
£87.95 More Information |
|
Trend CRAFTPRO Giuded Pierce and Trim Router Cutter 6.3mm 18mm 1/4"
Cuts out apertures in laminate worktops. The nose of the cutter acts as a guide follower. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 18 • Cut Length Imp... |
£22.95 More Information |
