|
Trend CRAFTPRO Bearing Guided Trimmer Router Cutter 6.35mm 12.7mm 1/4"
Trend Craft Pro 1/4in shank bearing guided flush trimming cutter - 6.3mm diameter Two Flute Carbide tips. Two flute carbide TCT tips for clean, professional finish on timber, plastic laminates and veneers. Bottom bearing guide for following an ... |
£19.95 More Information |
|
Trend TRADE Bearing Guided Trimmer Router Cutter 9.5mm 12.7mm 1/4"
For trimming and bevelling timber, lippings and plastic laminate edges. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. C... |
£28.95 More Information |
|
Trend Low Profile Trimmer Bearing Guided Router Cutter 19.1mm 25mm 1/4"
Self guided with low profile ball bearing guide and bearing fixing screw. For use in restrictive applications or within rebates of minimum 8mm. Down cut to prevent breakout on veneers. Specifications: • Shank Diameter: 1/4 &b... |
£59.95 More Information |
|
Trend Caravan Ind Guided Pierce and Trim Double Two Flute Router Cutter 12.7mm 22.5mm 1/2"
Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Specially designed for the caravan building industry, used for cutting apertures in windows, doors & the ... |
£70.95 More Information |
|
Trend Bearing Guided Trimmer Router Cutter 12.7mm 50mm 1/2"
Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. A maximum of 3mm overlap should be left before copy profili... |
£93.95 More Information |
|
Trend Bearing Guided Trimmer Router Cutter for Veneer 19.1mm 25.4mm 1/2"
Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy p... |
£59.95 More Information |
|
Trend Double Bearing Guided Trimmer Routing Cutter 19.1mm 25.4mm 1/2"
Ball bearings fitted to both nose and shank. Allows templates to be placed either on top or the bottom of the material, for ease of routing. Allows for irregular grained timber to be profiled more easily, by turning component other way up. ... |
£90.95 More Information |
|
Trend CRAFTPRO Bearing Guided Trimmer Router Cutter 12.7mm 16mm 1/4"
Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 16 • Cut Length Imper... |
£21.95 More Information |
|
Trend Bearing Guided Bevel Trimmer Router Cutter 27mm 9mm 1/4"
Cut a wider edge line, at an angle of 45 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 27 • Cut... |
£58.95 More Information |
|
Trend Bearing Guided Double Trim Router Cutter 18mm 15mm 1/4"
Trimming top and bottom surfaces simultaneously with bearing following the board. Two fluted. Increased productivity. Specifications: • Shank Diameter: 1/4 • Dia Metric: 18 • Cut Length Metric: 15 • Overall L... |
£79.95 More Information |
