|
Laser Laser 6936 Hands Free Suspension Arm Lever
This lever has been specifically designed to pull and hold down the lower suspension arms, to allow separation of the hub from the lower arm and also assist in the separation of the lower ball joint, or suspension struts from the hub. The 6936 is suitable... |
£221.00 More Information |
|
Laser Laser 6979 Front Strut Top Nut Wrench/Holding Tool - Volvo
The Laser 6979 is handy for when you are dismantling a Macpherson suspension strut, the securing nut on the top mounting can be difficult to access and the central strut itself needs to be held still while the nut is undone. This tool makes this a much... |
£40.00 More Information |
|
Laser Laser 7040 Rear Hub Bush Tool Kit - BMW 1 & 3 Series
The Laser 7040 is developed to remove and refit the rear outer suspension joint fitted to the camber control arm and the track control arm bush found on the BMW 1 & 3 series models. Applications: BMW 1 Series E81, E82, E83, E85, E86, E87, E88, F20... |
£144.00 More Information |
|
Laser Laser 6193 Rear Suspension Bush Tool - Land Rover
For use with Land Rover vehicles, the Laser 6193 is a rear suspension upper hub bush remover and installer. This unit is completed with a reliable manufacture and manufacture in Sheffield. |
£84.98 More Information |
|
Laser Laser 6161 Suspension Checker
The Laser 6161 is a suspension checker which can test the amount of play and wear in a vehicle's suspension. This tool is designed to be used in conjunction with a 1/2'' power bar. |
£38.83 More Information |
|
Laser Laser 6443 Track Rod End Removal Socket - HGV
The Laser 6443 makes track rod removal a much more simple process by utilising a tear-drop shaped slot, which slips easily over the track rod end but also prevents the socket driving off the joint when turning. The 36mm hex drive allows the use with either... |
£129.00 More Information |
|
Laser Laser 6898 Rear Spring Shackle Pin Socket - Scania 3/4'' Drive
The Laser 6898 is a rear spring shackle pin socket with a 3/4'' drive for Scania vehicles. This tool is manufactured from SCM440 steel for added reliability. |
£41.99 More Information |
|
Laser Laser 6974 Rear Hub Socket - Toyota Land Cruiser
The Laser 6974 is a rear hub socket for Toyota land cruisers models including the GXL Advantage, Blue Marlin and Blue Marlin GXL. This unit benefits from a 1/2'' drive and are 55mm deep with a 3 spoke profile for added usability. |
£40.92 More Information |
|
Laser Laser 5122 - Rack End Remover and Installer 28mm - 35mm
Track rod (steering arm) remover and installer. Size range - 25mm to 35mm. length 400mm. |
£89.98 More Information |
|
Sealey Sealey GA50 Laser Wheel Alignment Gauge
The Sealey GA50 has an optical system uses low radiation laser beam to indicate toe-in or toe-out, and a single leg configuration and reversible contact probes allow on ramp use. Works on practically all cars and light commercials with rim diameters... |
£711.00 More Information |
