The GA44 steering turntables are supplied as a pair and allow the user to record an accurate measurement of toe-in/out and full lock. With measurements taken whilst the vehicle is stationary, these turntables are equipped with a low profile two-way sliding...

Used to level the steering wheel before locking into position, prior to checking/adjusting the front wheel alignment. Ideal for use with Four-Wheel Laser Aligners such as Model No. GA70. Self-retaining and centring using a spring loaded mechanism. Features...

Quality made tool designed to aid fast tensioning and securing of CVJ boot banding material. Simply insert banding, tension using winding mechanism, and then pull over lever to cut the band to length. Fitted with large and comfortable handle grip.

Designed for the second generation of wheel bearing found on modern vehicles. These bearings are lightweight with an integral mounting flange. They are also pre-loaded with a retaining ring that secures the bearing into the housing. Suitable to be used...

Comprehensive set for the removal and installation of nuts on McPherson struts. Covers a large range of vehicle applications.

Steel body CVJ Boot band pliers with 3/8"Sq drive, for the assembly of new stainless steel bands on drive shafts where a torque setting is required.

Permits the removal of the top suspension nut by holding the strut piston, so it doesn’t rotate while turning the nut. The go-through design of the socket and ratchet allows the extension to pass through the middle. To be used in conjunction with...

Quickly removes the CV joint from the drive shaft without damaging the joint, and keeps hands free for releasing retaining circlip. Reduces risk of damage to transmission. Saves on labour time and suitable for most vehicles.

Designed for the second generation of wheel bearing found on modern vehicles. These bearings are lightweight with an integral mounting flange. They are also pre-loaded with a retaining ring that secures the bearing into the housing. Suitable to be used...

Sockets manufactured from Chrome Vanadium steel. Permits the removal of the top suspension nut by holding the strut piston, so it doesn’t rotate while turning the nut. The go-through design of the socket and ratchet allows the extension to pass...