Countersunk head consists of a high quality nylon plug and a zinc-plated nail screw. Pre-fitted for quick assembly. Led through the component in a time-saving through-type installation. When driving in the nail screw, the fixing sleeve expands and anchors...

Versatile nylon frame fixings with multiple anchorage depth. Approved for all brick, aerated and hollow block concrete and timber. Use in multiple applications within most building materials. Through special plug geometry, loads are evenly distributed....

Easy to install nylon toggle for high loads in panel building materials. Glass fibre-reinforced plastic to handle high tensile loads. White flush sleeve with snap function allows plug to be pre-installed quickly and securely. Adaptable for use with wood...

Polyester hybrid mortar specifically for fixings in masonry and non-cracked concrete with a variety of masonry blocks. Suitable for fixing fire escapes, handrails or canopies. Processed with the system components Fischer threaded rod FIS A, Fischer internal...

Zinc-plated steel. Suitable for non-cracked concrete. Ideal for steel constructions, guard rails, consoles, staircases, machines and gates. The standard anchorage depth achieves the maximum load-bearing capacities, so fewer fixing points and smaller anchor...

High performance 3-piece shield for even load spread. 8.8 grade Steel for high loads. Zinc-plated and passivated for corrosion-resistance. Optimized collar prevents rotation during installation. Drill size clearly marked on shield. Max. Fixture Depth:...

Countersunk head consists of a high quality nylon plug and a zinc-plated nail screw. Pre-fitted for quick assembly. Led through the component in a time-saving through-type installation. When driving in the nail screw, the fixing sleeve expands and anchors...

Blue passivated zinc-plated screws with countersunk heads, cross drive PZ and partial thread. The countersunk head allows for surface flush installation in wood. Suitable for fixing load-bearing components in coated wood, hardwood, softwood and timber...

2-component resin capsule containing styrene-free vinylester resin and hardener. Use with RG M rods, after rod destroys the capsule, it mixes and activates the mortar which seals the drill hole. No hole cleaning required. Not for masonry or resin sleeves....

For cleaning dust out from drilled holes before applying chemical resin and other debris. Ideal for projects in concrete and stone substrate work. Cleaning brushes should be used after using the pump. Suitable Hole Size: 6-16mm