5.8 grade zinc-plated steel with chisel point at one end and drive stud at the other end. During setting, the oblique end destroys the capsule then mixes and activates mortar. For use when driving into resin capsules or can be used with cartridge-based...

2-component resin capsule for use in cracked and non-cracked concrete plus natural stone. Contains styrene-free vinylester resin and hardener. No hole cleaning required. Cures up to 9 times faster than cartridge resin at 21°C. Not for masonry or resin...

Manual dispenser gun for use with 380, 390 and 410ml cartridges. Robust design ensures a longer tool life. An infinite variable feed allows the exact dosing for easy handling. Ideal for applications where mechanical anchors are not suitable.

Zinc-plated steel anchor with hexagonal screw for structural fixings. Time-saving through-type installation. When tightening, the cone is pulled into the expansion sleeve and expands it against the hole wall. The recesses act as a crumple zone to take...

Transfers force optimally in the building material through the 4-way expansion. Apart from the typical expansion, the high-quality nylon used for its production provides secure and permanent fixing. Ideal for fixings in hollow building materials, in aerated...

Blue passivated zinc-plated screws with countersunk heads, cross drive PZ and partial thread. The countersunk head allows for surface flush installation in wood. Suitable for fixing load-bearing components in coated wood, hardwood, softwood and timber...

Transfers force optimally in the building material through the 4-way expansion. Apart from the typical expansion, the high-quality nylon used for its production provides secure and permanent fixing. Ideal for fixings in hollow building materials, in aerated...

5.8 grade zinc-plated steel with chisel point at one end and drive stud at the other end. During setting, the oblique end destroys the capsule then mixes and activates mortar. For use when driving into resin capsules or can be used with cartridge-based...

Blue passivated zinc-plated screws with countersunk heads, cross drive PZ and partial thread. The countersunk head allows for surface flush installation in wood. Suitable for fixing load-bearing components in coated wood, hardwood, softwood and timber...

High performance 3-piece shield for even load spread. 8.8 grade Steel for high loads. Zinc-plated and passivated for corrosion-resistance. Optimized collar prevents rotation during installation. Drill size clearly marked on shield. Max. Fixture Depth:...