Hi All,
I hope someone can help as my old washing machine is acting up.
I pulled out the machine from the cupboard and placed it on some bricks so it is raised slightly off the floor.
1st problem was it wont drain, so I found a thread here and got the front panel off.
It appears to be clogged with limescale so I got some 'scale away' and drained that off manually.
2nd problem is I found some white plastic parts under the machine.
Parts '1' and '2' in the diagram.
I dont know if these are part of the machine or lost childrens toys.
3rd problem I have but the machine back and now when I start a wash cycle the programme dial just keeps turning whthout doing anything useful.
4th problem - although this may not be a problem as such. I took a picture of the bottom of the machine and there is a plastic hydrolic looking arm which is only attached at the top. Should this be so?
TIA Andy
I have some pictures below.
I hope someone can help as my old washing machine is acting up.
I pulled out the machine from the cupboard and placed it on some bricks so it is raised slightly off the floor.
1st problem was it wont drain, so I found a thread here and got the front panel off.
It appears to be clogged with limescale so I got some 'scale away' and drained that off manually.
2nd problem is I found some white plastic parts under the machine.
Parts '1' and '2' in the diagram.
I dont know if these are part of the machine or lost childrens toys.
3rd problem I have but the machine back and now when I start a wash cycle the programme dial just keeps turning whthout doing anything useful.
4th problem - although this may not be a problem as such. I took a picture of the bottom of the machine and there is a plastic hydrolic looking arm which is only attached at the top. Should this be so?
TIA Andy
I have some pictures below.