- Joined
- 9 May 2016
- Messages
- 24
- Reaction score
- 0
- Country
Hi guys,
I have a problem with some emergency lighting.
In a place where there are 6 emergency lights (all around 20 years old with old tube bulbs)
One got damaged so I replaced it with a new LED non-maintained one.
It is installed correctly and the SL wire has been removed to make it non-maintained.
However when I switch the power back on all the emergency lights go off and show the Green battery light except the new LED one.
No matter what I do I can’t get it to go out.
I also changed another regular ceiling light fitting in another room at the same time which was earthed but the new light was double insulated so I just blanked off the earth.
But I don’t think this would affect it, would it?
I’m sure it was working fine before I changed the other ceiling light.
Thanks very much for your help.
Matt.
I have a problem with some emergency lighting.
In a place where there are 6 emergency lights (all around 20 years old with old tube bulbs)
One got damaged so I replaced it with a new LED non-maintained one.
It is installed correctly and the SL wire has been removed to make it non-maintained.
However when I switch the power back on all the emergency lights go off and show the Green battery light except the new LED one.
No matter what I do I can’t get it to go out.
I also changed another regular ceiling light fitting in another room at the same time which was earthed but the new light was double insulated so I just blanked off the earth.
But I don’t think this would affect it, would it?
I’m sure it was working fine before I changed the other ceiling light.
Thanks very much for your help.
Matt.