So did the electrical installation require RCD for that circuit? If so, how come?
Possibly wired in t&e without earthed metallic protection and buried at a depth of less than 50mm?
So did the electrical installation require RCD for that circuit? If so, how come?
Possibly wired in t&e without earthed metallic protection and buried at a depth of less than 50mm?
When is someone else going to post some 17th board examples
milliamp
Board was pre wired wylex unit and the neutrals were as provided.
Main switch out to each RCD in and RCD out to RCD1 and RCD2 neutral rail.
When is someone else going to post some 17th board examples
Well spotted RF, to be honest I don't know. They (CEF) didn't have any M2 RCBO's in stock. Why would the use of a non M2 device be against regulations though ?
Can't see a problem with it anyway, if they fit OK. A bus bar and din rail are not exactly in the realms of rocket science !
M2.
Yuk.
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local