Hi i am after selling 4 x 5 litres of ecosure undercoa and the same in gloss if anyone is interested? i live near liverpooll (chester area). cheap as in the way!!
HI i have an albion unvented tank which normally sits at 3 bar pressure all day. i recently went away for a month so shut of the water supply and released the pressure via a hot water tap down to 0 bar. A month later when turning back on, it wont go above 0.2 bar?!! the water is hot and exactly...
hi i have (20mm mdpe to 15mm copper stop cock) still popped at copper to copper connection . Being over protective so will change copper to plastic valve PLUS add an underground valve as the garage is 50m away. 4 days leak = £800 water bill!
Hi i am after someadvice please. I had my outside tap to a detach garage burst (resulting in 300m3 of escaped water!) so i am considering putting an underground stop cock to isolate the whole garage. It is 20mm mdpe i laid myself (inspected to correct depth etc...) just after advice reagarding...
I have posted this in render plaster too as unsure for best results:
I have been waiting for my painter to do the outside of my newly rendered house for 6 months and have decided to have a go my self. Just after advie regarding
1 how many coats?
2 PVA or under coat first?
3 drying...
I have been waiting for my painter to do the outside of my newly rendered house for 6 months and have decided to have a go my self. Just after advie regarding
1 how many coats?
2 PVA or under coat first?
3 drying time between coats?
4 best paint to use? looking at white or cream
What...
1996 Pug 306 D turbo.
Hi folks tested my alarm to find only the lights flash and no sound? Cant find anything in the hayes book.
Is is connected to the horn (which works ok) or a separate speaker?
Thanks
Thanks for the heads up !!
So whats the best oil to use please? i do short start stop journys. I have seen TOTAL QUARTZ 7000 mentioned?
thanks fellas!!