Search results

Hi all, Visually the install looks rough but to name few problems I don't no how it's been signed off The house was rewired 3 years ago and all is ok with this work but a extension has been completed and several new circuits upgraded onto the existing board * incorrect manufacture breakers on...

Hello, No instructions on site but am thinking it will be pcb but need some ohms reading to test as can't find any online I have a constant flashing light on the display. Cheers

I'm a heating engineer and if I was to wire the 10 way box and controls components I would always want to run a cable with the appropriate amount of cores including a earth, I always come across wires where they use the earth as a live wire . Can this be done Most of the controls are double...

I am looking at going collage to finish my electrical course , I already have 2330 level 2 but don't no what course I should be looking at now as there are so many to choose from and the numbers mean nothing to me Please advice

Just a quick question regarding the diverter assembly on a halstead ace, as it has pressure sensing pipes, The pin does not activate the micro switch . would usually just replace the diverter to eliminate call backs but could there be a alternative reason on this model why the pin does not...

please can someone confirm if you can install a pendant in a bathroom.

I have had my van converted by a professional company. My insurance required a gas certificate, should the company that fitted it supplied the certificate. As they are saying this is a extra cost of £110 by another person. I suspect the conversion company are not gas safe and this is why the...

Hello people. Need a little help, I am gas safe and do have LPG on my card but only touch once in a blue moon and avoid if possible. I have to give a cp12 for the insurance on a installation of two cookers and a small bottle (I think it is 7kg butane). These are connected on a single reg as...

i rent out a property and the tenant as asked if they can remove the banister to open up the hall. i said this is not allowed due to safety reasons and they went on the internet and came at me with the gaps between the spindles are to wide, approx 210mm. i am under the impesion that new builds...

hello sparks, Is HAGER a decent make fuse board and how does it compare to MK

hi all, I have fitted my first new vaillant pro 28 over the weekend, has anyone else had a issue with the CH not coming on to main burner. I phoned vaillant and the said take the boiler out of auto on the D settings. when i rated the boiler at 24kw it seems to work ok but there is still a 10...

I Have recently purchased a house to rent. After i gained access to the property i noticed that the fuse board if new and the cabling colours are brown and blue. on my paperwork i noticed "electrical alteration work since 2000 -no" The question i would like to ask is what check should i have...

hi - need some help with connecting kinetic Az-teck external sounder unit to my control box. I am unsure of the make but the pcb is made by networker the connections on the bell box are 1/tamper return 2/bell(-) trigger 3/supply 12v (+) 4/ supply 0v (-) 5/strobe (-) the connections on...

Hi need some help with boundary’s, I live in a mid terraced house. The neighbours house protrudes out more than mine…..I have had a porch built on the front, the porch roof carries on for about 5m on a 8"-3" beam and rest on a joist hanger which is fastened to the neighboursing house. The...

hello, Whats checks and paperwork do i need in a rented property? Do i have to have hard wired smoke alarms?

As you can tell i live in birmingham I have been in the gas ind for 12 yrs since left school, i have only ever worked on natural gas but after working beside a LPG rgi i am thinking of doing my acs change over What do You think - also whats the correct procedure for a tt on bulk and...

The last couple of FHS i have done been seperating the upstairs and downstairs. A Typical job has 7-8 Rads, I cant see why you have to zone with this number of rads. Whats you thoughts.

i need some help to find building regs for radiators in conservatory. please help

hello need some help and advice i have a over head incoming phone cable. the first outlet then is the loft- from there landing , hall, bedroom1, kitchen, lunge1, bedroom2, lounge2, and bed3 also from the landing there is a third wire to a hall way then from there to a utiliy yes intotal...

what you think. condence runs internal from loft follows route of chimney approx 6m then under lounge and hall floor approx 12m installed 4years ago and never froze, good workmanship???????????