Search results

Hi has anyone done the heat geeks online training course? I'm thinking of doing it

Has anyone fit or worked on one of these units before?

I have one of these to look at 25litres apparently no flow of hot water. Has anyone worked on them before?. My first thoughts was maybe the pressure reducing/composite valve is blocked.

On a heat pump install, when installing a magnetic filter. This is in place to protect the condenser on the heat pump. Which is like a plate heat exchanger on a boiler. So the magnetic filter should be installed on the return pipe to the air source heat pump?

Are plug in electric hobs any good? I'd be in a situation where I'd me plug-in the hob in but wouldn't have a spur/rocker switch above on the kitchen tiled area to turn it on. So would be constantly switch on Is this not a good idea? Thanks

Has anyone worked as one, or done it part time to see if it was a good fit for them?

Has anyone recharged the internal expansion vessel on this cylinder? I believe it's a case of turning the cold feed to the cylinder off. And opening the lowest tap on the system. Then also operating the pressure relief on the composite valve? I am G3 just a while since come across one with...

Does anyone who has the water regs qualification. Know if you resit it now it last for life or every 5 years? I did mine with my NVQ level 3 in plumbing and it says it only lasts 5 years. Thanks

Hi has anyone done the level 3 heat pump installation course? Is it worth doing? Thank you

I have heard these are very expansion to run. Do they produce a COP of 1? Every 1kw of energy to 1kw of heat?

I am good at working with copper bending and soldering. However I have never used press fit before on copper. Is it easy enough to get used to/get fast at?

If draining the heating system on an Splan system with a indirect cylinder. If leaving the heating drained over night. Is it ok to turn the immersion on to the cylinder? It won't effect the coil if it's empty of water. Thanks

Has anyone managed to get a job and work abroad as a plumber in the E.U? Guessing it is harder now after Brexit. Other then that I think New Zealand/ Australia are after people

What can caused a sealed C/H system to constantly keep grabbing air in the upstairs airs? The auto air vent on the boiler sucking air in? Sludge in the system creating air? Anything else. Thanka

Has anyone had much experience repairing or had faults with this ideal standard dual flush valve. Thanks

Has anyone had any experience with this flush valve it's stiff to push when flushed. But pushes/ flushes ok without the lid on. Thanks

Has anyone used any anticut gloves that are actually workable in? I recently damaged a nerve in my hand and looking at working with some in the future thanks.

Has anyone recently re-,done there unvented assessment? How is the theory paper?

Would this course make someone qualified enough to do simple jobs in rented properties. Changing switches, light fittings etc. Thanks

Is there anyone on here that has become a qualified electrician by only to college on an evening and doing electrical installation level 2 and 3. And completing a NVQ portfolio? Thanks