Search results

I about to install a new hearth to fit a multifuel stove on, the problem is there is a gas pipe that was used for a living flame fire. Would it be ok to bury the gas pipe covered with gas tape in the morter of the new hearth? The hearth will be about 100mm thick.

I am going to have a multifuel burner insalled but the fireplace needs widening, would I need to use acrow props with strongboys to fit a new lintel? The chimney breast is around 170cm wide I intend opening the fireplace to 100cm wide

Yes the house was built in the 30's at the moment the opening is around 40cm wide and 70cm high

I intend to install a wood burner to fit inside the fireplace, But i need to make the actual fire place larger to fit the wood burner in, I need to take out around 15cm each side, would I need to fit a lintel to support the bricks above? I would like some advice how to do this and if it is going...

Cheers, thanks for that

I would like to know both the size of the porch will be 1.3m x2.0m

I'm building a porch with a cavity wall base and a upvc windows to to top with a tiled roof. What would the depth of the footings need to be?

I have just left the water there. When its dry weather the water level goes down. It's just something I have to put up with.

Cheers your a gem

Where can I purchase neoprene primer?

Thanks for that guys.

What is the normal gap between stair spindles? I know its meant so children can't fit through but what is the maximum gap allowed.

I have a 2000 w reg Citroen berlingo MPV I have lost the owners manual and I can't put the clock to the correct time the clock is intigrated within the speedo, can somebody help?

I have just bought a new wireless router, set up with a ethernet modem, I have put in my password and user name for my intrernet provider but when I try to get on the internet I can't. Could it be my antivirus software?

Try this site http://www.diydoctor.org.uk/projects/mixing_concrete.htm

I am currently re-routing the hot water pipes in my bathroom and I have come accross a T juction in the hot water supply (of a combi boiler) that goes to the cold water main, has anyone any idea what this could be and if I actually need this. I think it could be some sort of safety device to...

I intend to skim over existing plaster, is this acceptable? What will i need to do to key the new skim in?

Hi Try this site you should be able to calculate what you need. http://www.diydoctor.org.uk/projects/mixing_concrete.htm

The concrete is for general use such as paths and footings etc

Could anyone tell me the best mix ratio for concrete?