Search results

Hi guys We are in the process of putting our house on the market. Aafter doing a bit of research and viewing a few houses the ones that seem to sell quickest are the ones that have been painted/papered in a magnolia/cream colour. Especially the ones that builders have bought renovated & put...

Thanks for the info :)

Thanks for the info misterhelpful. THe walls are faily sound there is some light dusting in one or two areas I was told that the first diluted coat would seal this though. Cheers Jim

Hi guys I am looking to have the exterior of my house and garage repainted. I have had 2 widely varying quotes so far and I am waiting for a third. Each one though has recommended a different paint and critised the others. One saying use water based the other oil based the third a...

A quick update After speaking to inta again (Stuart was very helpful in the technical dept) it turns out I did have the wrong instructions for the cartridge that was fitted to it. They are now sending ma a replacement cartridge :)

Thanks for the info Chris I will give it a go.

Hi Nige Yes I have tried turning both ways with no difference in temperature. I was very disapointed with the manufacturer they seemed to know sweet F. A about the valve and how to adjust it.

Hi guys I hope you can give me some advice. I recently purchased a IntA VUE exposed shower. I have just fitted the shower and need to increase the temperature. Unfortunately the instructions in the installation book do not relate to this shower valve. I have been in touch with Inta...

Hi I will have another look through their site to see if I can find it again for you. but I am sure I saw it there somewhere. It was something I noticed at the bottom of one of the pages may be its to order by special request? I will let you know if I find it again.

Thanks for that Jaffa72 I now see what you mean Cheers :)

Hi I was told they where decra but I am not sure if they are but they look the same. If you look on decra site though they say they will actually make tile strips up to 22 metres long. So who knows what they are as long as I can get them to fit correctly thats the main thing :)

Thanks for the info :) I will have a look on the decra website (not sure if they are decra but look the same) I wont need to bend any just cut to size. One more question though. They are going to be going on to a garage roof that is timber covered with felt. Will I still need to...

Hi I hope some one can give me a bit of info. I was just about to refelt my garage roof when I was offered some used decra? metal tile effect roof sheets approx 14 ft long which I will have to cut down. Can some one please tell me are they easy to cut and if so what is the best thing to...

Hi thanks for the link. I would return it but as I said I opened it up to have a look inside which meant levering it open so cant really return it now I have damaged the casing. Does any one know if it is possible to adapt it. Cheers Jim

My wife needs to be able to record her telephone conversations for her work obviously with the permission of the person on the other end of the line. I purchased a phonapart telephone recording adapter lead which I plugged in to the phone socket and connected to the mic socket of a recorder...

Thanks for the info Softus :)

So just to check I have this right. Change to a 16 amp breaker leave 2.5 mm cable as is from CU to switch and run 1.5 mm heat resistant cable from switch to bottom immersion heater. Or to run both immersion heater at the same time Run 4mm cable from CU (what size breaker...

Thanks for the info guys. I shall change the breaker for a 16 amp one. Don't know why about the electric supply all I know is there is one CU for the full house with no add ons. This is a old house 1840s and the electrics when fitted just ran the lights and sockets & the one immersion...

Hi guys I have just removed a old hot water cylinder which had a single immersion heater fitted. I am going to be replacing it with a larger water cylinder that has 2 immersion heaters fitted. I don't have cheap rate electricity so wondered if it is practical just to wire both heaters...

Thanks for the info Tony. Is thread tape ptfe ? Cheers Jim