Search results

Thanks for the reply...due to the age of the shower I've ordered a replacement. Many thanks for your time though. Just got to get the 6mm cable swapped to 10mm now :cry:

I've been knocking through into the extension today, with a fair bit of hammering and banging. The bathroom is very close to where I've knocked through. Gone to have a shower tonight to get cleaned off...a couple of minutes in, the temperature dropped right down to barely lukewarm. Its an...

Didn't realise the stuff was so unpopular. I'm just a DIY'er. So, should I glue or not ? Thanks

Hello, I''ve had a quick search for tha answer on this but nothing came up. Installing the above...22mm to a first floor extension. Got plenty of chipboard screws 5 x 50mm.....do I also need to glue the joints? If so, is this to prevent future 'squeaking' ? Many thanks Lee

My brothers a brickie and he always adds Plasticiser to the mix....he reckons its easier to work with / stick to the trowel.

Hello all, I'm having a pro come to fit an EDPM roof over the front of the garage but I'm gonna fit the cladding myself. The cladding across the front of the garage needs replacing......it spans the garage and porch. The cladding needs to be 450mm deep. The span is five metres. I'm...

I'm pretty sure they used waterbased for the flat and contact adhesive for the upstand. Luckily, I don't think it was a freezing night so hoping all is ok. There is a small 'bubble' around five inches long on the upstand, just below the trim, so I assume the adhesive was missed here...

Thanks for the replies....job done today - pleased with it. Cheers

Hello, don't bite my head off.....I know no-one can give an accurate evaluation without seeing the job....just need to know if I'm being ripped off or not. Flat Roof......I've put all of the timbers, insulation boards (celotex with ply on top) in. Approx size is 2.3m x 6m....think its...

Thanks everyone for the replies. Nope, I don't have the funds for a new boiler. I don't want to sound like a sob story, but iI've already been a bit naive with the price of things to do with the build (the Steel cost me a grand !) , and a new boiler wasn't a factor when we did the costings...

Bad news all round then :( To be honest, the extension is being done on a small budget (brothers a brickie, mates a carpenter etc) but I appreciate your advice.....maybe have to consider moving the boiler / fitting a new one. Thanks very much

Hello, I have an old Potterton Puma 100 that is located in the loft and the flue goes straight out through the gable end wall. I am in the process of building an extension onto the side of the house so the old flue outlet will be covered by the new building. I cannot extend the horizontal...

Thanks for the reply....no I didn't use any silicone grease.....would I get that from a DIY warehouse or Halfrauds ??? I did clean inside the valve body as best as I could. The annoying thing is, apart from the leak, everything is working perfectly now so it WAS the wax capsule that was at...

Evening everybody, After some useful advice on this site, have finally managed to change the wax capsule on the Potty. Aboslutely gutted to find a slow drip leak on the union of the DV / wax capsule housing. The actual housing has a rubber seal and from what I can see just pushes onto...

Think its a 22mm nut......would you recommend one of these....sorry to be a wuss, just don't want to mess it up....once the nuts rounded its game over...

Cheers Scott......but theres my problem.....what did you use to remove the nut ? ....my socket set won't grip cuz theres not enough depth on the nut and the trusty adjustable is beginning to round the nut so I've stopped that quick sharpish.....did you use a normal spanner ? Maybe a trip is...

Thankyou for your reply, very kind. However, I have actually purchased the wax capsule so think it would be prudent to fit whilst the system is drained etc......just not sure how to do it.

I know this is the last things the experts will want on a Friday night but I'm stuck. Problem - Boiler firing for thirty seconds on CH and then cuts out. Thought I'd have a go at changing the wax capsule myself and now wish I hadn't ! Does the nut in front of the two DHW pipes undo? If...

OK cheers. The boiler was purchased brand new and the PCB has never been changed so it seemed odd. Might be worth plumping for the brand new boards then. I know no-one can say for sure without seeing the boiler, but would you say its the PCB from the symptoms I described? Thanks all.

Cheers bengasman......just strange.....all the listings on Ebay state 18867 does NOT fit the 100e but its definitely in mine ! I think from the posts on this forum concerning the PCBs, its something of a miracle its lasted ten years. Thanks again.