thermostat

Wondering if anyone can help as we’re having trouble with our heating. We have an old conventional boiler which is controlled by a separate thermostat. The thermostat shows that heating should be off however the radiators are boiling hot and you can hear the boiler chugging away as though we...

Hi I've got a combi boiler with a British Gas WPT1 wireless thermostat and hive single channel receiver. I'm thinking about upgrading to a full hive system to be able to use the mobile app etc, so could anyone tell me, can I just buy the hive hub and continue using the BG WPT1 thermostat and...

Hi All, I've tried to look for this question in the forums and some are close but don't seem to be exactly what I have. I am trying to wire a bh3000 thermostat to an 831 vaillant boiler. I have two wires from the wall (brown and blue) + earth. I have connected the two wires from the...

Hi! Following some ongoing problems my Boiler Thermostat has completely stopped working rendering my heating non existent! The overheat reset button is now not working at all. I also believe that the actual thermostat function has stopped working properly - for some time have been having...

Hi, I have brought a Tado smart thermostat and currently attempting to install it. I currently have a Worcester Greenstar i boiler connected to a Honeywell BDR91 which wirelessly links to a Honeywell EHE0200361. (All images attached) I have entered this information into the step by step guide...

Could someone please take a look at my Boiler/Hive set up and let me know what I need to do to install: 1 x HIVE single channel Receiver I have; 1 x heating valve installed and ready to go (black wire in red box), which will feed my garage conversion consisting of 3 radiators (heating only...

Hi All, I have has a new Vaillant Ecotech boiler installed as well a Salus RT520TX receiver and thermostat. Everything has been going fine but I have woken up today with no heating. I have tried to pair the receiver and thermostat by holding down the pairing button which results in one solid...

Hi all, Firstly i want to thank you all for reading this, I'm pretty stuck so any help would be amazing. I currently have an Independent c24 combi boiler. This boiler has never had a thermostat fitted so had the original red cable connection, the boiler has only ever had the timer switch...

Hi there I am installing a new 3rd gen Nest Thermostate which is replacing our old siemens RDE100.1 wireless one. On the wall the old seimens is has connectors that fit into slot on the wall. I have no idea what the zones are so i can't find which slot they go into on the nest. Can anyone...

Hi we’ve had a new wireless thermostat fitted to our combi boiler. we have it on manual temp mode and most of the day it appears to keep it within 2 or 3c of what we set. Not great but will do however in the evenings we will have it set to say 20c but the boiler just keeps firing the heating...

Hi, I've bought thermostat that either doesn't have or I can't find a wiring diagram, it looks straightforward but it's not something I'm familiar with. Any help would be much appreciated. It's a Moes bht-002-gclw. My current timer/programmer is a Hortsmann Channel Plus H17XL: Left to right...

Hi, hope someone is able to help. I’ve recently turned my heating on and read the instructions for the Siemens RDJ 10 thermostat repeatedly so they’re no stuck in my brain(!) I’ve set it so the temperature should be 20.5 degrees, problem is it’s only getting to 18. I don’t understand why My...

Hi, I'm looking to replace my Honeywell CM907 thermostat with a Nest Thermostat. I'm happy to get someone in to do it but if it's simple enough the I'll do it myself. So, I've read the guide online (it's not been delivered yet) and I'm a little confused. Do I just need to wire in the...

Hi, I have a question related to the issue above I’m hoping someone can help with! I have the same boiler (greenstar 30si) and a Worcester wireless thermostat and receiver in the front panel of my boiler. The thermostat is broken and I’m wanting to replace this with a Drayton digistat plus...

Hi everybody I have brought a new house, the hot water does not seem to be coming hot enough after the boiler has been switched on for an hour, the central heating works ok but the temperature of the hot water is Luke warm all around the house, I went into the loft and looked at the cylinder...

A little while ago, the hot water tank on my pumped heating system started producing scolding water. Doing a bit of research, it pointed to an issue with the tank thermostat. It was many years old so I bought and fitted a new one. Same problem - scolding water. I tried adjusting the...

Hi all Installing a hive in replacement of our antique Honeywell St699. Just wanted to check regarding the wiring of the thermostat to bridge it. Am I right in thinking yellow wire needs to join blue to complete the circuit? IMG_20191003_140921 by Thematrix12 posted 3 Oct 2019 at 2:45...

Can anybody please tell me which model this is?.

Good evening to all, Need a bit of help on installing a Hive Active Heating Thermostat, or to be more precise fixing a very sloppy work by a "cowboy" electrician at a friends house. So here we go. System comprises of: (1) Trianco Aztec Boiler (2) Separate hot immersion heating water tank (3)...

Hi All, I would like to replace a Honeywell room thermostat with a Drayton Wiser (I'll also be replacing the radiator valves later). Can I just confirm that: N & L stay the same 2nd L to A loop in the Honeywell should now be L to 1 in the Drayton 2 in the Drayton stays empty B in the Honeywell...