Hi all here is my plans and I would love some feedback.
My plan is to remove an existing 1 gang light switch and replace it with a 2 gang light switch and add a 500 watt security light to the switch.
At the moment the circuit has a 50w *4 light fixtures and a 20w light and my plan is to add the 500w light with its own light switch to the lighting circuit.
I’ve drawn a basic diagram of what I’m think of (please excuse the bad drawing it’s been some years since I’ve done one)
Is this possible or am I barking up the wrong tree.
Thanks in advance
My plan is to remove an existing 1 gang light switch and replace it with a 2 gang light switch and add a 500 watt security light to the switch.
At the moment the circuit has a 50w *4 light fixtures and a 20w light and my plan is to add the 500w light with its own light switch to the lighting circuit.
I’ve drawn a basic diagram of what I’m think of (please excuse the bad drawing it’s been some years since I’ve done one)
Is this possible or am I barking up the wrong tree.
Thanks in advance