Hi Guys,
Wonder if you can help. My alarms are quite old now but still working.
I had the Battery replaced last november, i have sensors in all the rooms (all working fine)
This morning at 4am the inside bells were ringing really loud. I tried to disable via digi keypad, but after about 10 mins kept going off. I have now turned off the power switch located to where the control panel is and all is quiet at the moment.
What happened last night as usuall we armed the garage circuit c and went to bed as normal. When the bells were ringing i disabled the first time with my 4 digit code and i had the BF light up along with the fault and service light. Since turning off the power switch, the keypad first went dead, but now power light is flashing and the day light is lit as normal, as if the battery is doing what it is supposed to! How weird is that?The kepad is a series 3200 Modern Alarms one but the family friend (engineer) is in spain on holiday and i have no way of contacting him. I know when he changes our battery he has an engineer code to use when he removes the battery control panel cover, so obviously dont want to touch this in case of more trouble, although i know how easy it is to change (frustrating!!) But i dont think it can be the battery.
Has anybody any idea what it could be and how to fix please? I dont want to put the power back on to the alarm in case the same thing happens again(prob will) as i probably have already woken up the neighbours enough thismorning.
Thanks from a very frustrated lady!
Wonder if you can help. My alarms are quite old now but still working.
I had the Battery replaced last november, i have sensors in all the rooms (all working fine)
This morning at 4am the inside bells were ringing really loud. I tried to disable via digi keypad, but after about 10 mins kept going off. I have now turned off the power switch located to where the control panel is and all is quiet at the moment.
What happened last night as usuall we armed the garage circuit c and went to bed as normal. When the bells were ringing i disabled the first time with my 4 digit code and i had the BF light up along with the fault and service light. Since turning off the power switch, the keypad first went dead, but now power light is flashing and the day light is lit as normal, as if the battery is doing what it is supposed to! How weird is that?The kepad is a series 3200 Modern Alarms one but the family friend (engineer) is in spain on holiday and i have no way of contacting him. I know when he changes our battery he has an engineer code to use when he removes the battery control panel cover, so obviously dont want to touch this in case of more trouble, although i know how easy it is to change (frustrating!!) But i dont think it can be the battery.
Has anybody any idea what it could be and how to fix please? I dont want to put the power back on to the alarm in case the same thing happens again(prob will) as i probably have already woken up the neighbours enough thismorning.
Thanks from a very frustrated lady!