- Joined
- 19 Nov 2007
- Messages
- 2
- Reaction score
- 0
- Country
Hi,
I am currently fitting out my new bathroom and need some advice on the wiring I am doing. I am fitting 3 ELV spots fed from a transformer in the loft and also a fan/light combo. Both state that they require a 3a fcu. Can i just use one 3a fcu for both (total draw not likely to exed 1a for both)? Any maintenance on either spots transformer or light/fan will be done in the loft and therefore cant see why anyone would want to isolate separately.
Also i am feeding both off the main lighting ring (have taken exisiting mains light out) i.e lighting ring to switch, swtich to junction box, junction box feeds both spots and ligh/fan. Is this ok because of the low current draw?
thanks
Stu
I am currently fitting out my new bathroom and need some advice on the wiring I am doing. I am fitting 3 ELV spots fed from a transformer in the loft and also a fan/light combo. Both state that they require a 3a fcu. Can i just use one 3a fcu for both (total draw not likely to exed 1a for both)? Any maintenance on either spots transformer or light/fan will be done in the loft and therefore cant see why anyone would want to isolate separately.
Also i am feeding both off the main lighting ring (have taken exisiting mains light out) i.e lighting ring to switch, swtich to junction box, junction box feeds both spots and ligh/fan. Is this ok because of the low current draw?
thanks
Stu