Sometimes people ask for instructions on fitting these slide switches.
Remove old slide switch.
Pull all timer segments forward ( off ).
Look into the slot and at the left is a lever, hinged from the top, with an opening at the bottom.
Gently move the lever towards the right where it should stay putting it pretty much in the middle of the slot.
Take the replacement slide switch and carefully place it in the slot up against the RIGHT hand side and gently push it inwards keeping it parallel.
If you have done it correctly then it will clock into position.
It should then be OFF in the middle, ON at the left and ON/OFF in accordance with the timeclock on the right.
All other queries have already been covered in previous postings on this thread so please read them.
Tony Glazier
Dear tonyWe keep all these parts in stock but you must contact me by email from my profile.
Tony
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local