Hi all
The chuck on my drill has locked open after using a 10mm steel bit, I have managed to remove the bit but I can't close or use the chuck. I have tried to remove the chuck using the allen key I can see inside but 4mm is to big and 3mm is to small has anybody had this problem or can give me some advice on how to proceed.
Thanks.
The chuck on my drill has locked open after using a 10mm steel bit, I have managed to remove the bit but I can't close or use the chuck. I have tried to remove the chuck using the allen key I can see inside but 4mm is to big and 3mm is to small has anybody had this problem or can give me some advice on how to proceed.
Thanks.