Candy washing machine fills up and emptys

Joined
20 Jan 2014
Messages
4
Reaction score
0
Location
Surrey
Country
United Kingdom
Ive got a candy go fs 262 6kg , it's driving me potty :D
I turn the power on, select a programme , it starts automatically .... But fills up to the top and then empties and so I continues, that's all it does:(

I've done the obvious things , clean filter and check for kinks in hose ,

Any help would be greatly appreciated

Thank you
 
Sponsored Links
Presure hose split or blocked Presure chamber.
 
At the other end of the pipe. Blow down the pipe with water in the drum. Till you hear bubbles in the water. That will clear the chamber out.
 
Sponsored Links
At the other end of the pipe. Blow down the pipe with water in the drum. Till you hear bubbles in the water. That will clear the chamber out.

I've done that and I can hear bubbles fine.......
And the pressure switch is clicking .... Put it back together and still the same ....filling to the top and then emptying.

Any ideas ?

Thank you again for your reply :)
 
Put the Presure hose in a bucket of water and put finger over one end and blow down it. Only needs a pin hole in that tube to over fill. If no bubbles show then you got a fault in the pcb.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top