Lockout problem with a Danesmoor 26/32 boiler.
Electro Oil 11d burner with satronic control box.T830b
The burner has had a new nozzle and photocell replaced.
Boiler fires, with flame then goes off. When the control box is reset the process to lockout takes 30 seconds every time. Was suspecting a fault with the satronic control box.
Customer claims boiler began to lockout after delivery of oil. Pump pressure is stable at 120 during process. Filter at tank, pump filter have been cleaned & nozzle has been changed after delivery.
Fire valve is the wheel/gate headed type - not a fusible link.
Flue balanced square type directly to outside.
I appreciate any suggestions.
Electro Oil 11d burner with satronic control box.T830b
The burner has had a new nozzle and photocell replaced.
Boiler fires, with flame then goes off. When the control box is reset the process to lockout takes 30 seconds every time. Was suspecting a fault with the satronic control box.
Customer claims boiler began to lockout after delivery of oil. Pump pressure is stable at 120 during process. Filter at tank, pump filter have been cleaned & nozzle has been changed after delivery.
Fire valve is the wheel/gate headed type - not a fusible link.
Flue balanced square type directly to outside.
I appreciate any suggestions.