The hot water from electrically heated hot water system is unbearably hot, the probe type thermostas fitted do not seem to work, and because of the way the tank has been fitted it is immpossible to remove/extract the switch and probe, without major structual work.
Strap on thermostats seemed to be the answer
Danfoss ATC Immersion heater cylinder thermostat.
I purchased this thermostat from Screwfix and the fitting instructions appear vague and incomplete.
It tells yu to connect to terminals 1&3 Make Temp rise ?????
1&2 Break on Temp rise ?????
What does the above mean
No instructions on how to connect to the Immersion Heater.
eg what wires go were.
I have wired the themostast with 3 core flex Green/yellow to Earth
Brown to Terminal 3 and blue to terminal 2 (break on Temp rise)
How do I coonect the Danfoss thermostat to the heating element in the water tank.
Can anybody help please.
Strap on thermostats seemed to be the answer
Danfoss ATC Immersion heater cylinder thermostat.
I purchased this thermostat from Screwfix and the fitting instructions appear vague and incomplete.
It tells yu to connect to terminals 1&3 Make Temp rise ?????
1&2 Break on Temp rise ?????
What does the above mean
No instructions on how to connect to the Immersion Heater.
eg what wires go were.
I have wired the themostast with 3 core flex Green/yellow to Earth
Brown to Terminal 3 and blue to terminal 2 (break on Temp rise)
How do I coonect the Danfoss thermostat to the heating element in the water tank.
Can anybody help please.