design, installation and testing forms?

[Delinquent]

My BCO has told me I can install a new circuit and he sign me off as competent if I complete the above forms - he suggested asking local electrical contractors if they had some but not having much luck that route - anyone know where I could either download some or get hold of some?

Many Thanks

 

[BS3036]

Download them from the IET site or photocopy them from your copy of BS7671.

 

[Delinquent]

Download them from the IET site or photocopy them from your copy of BS7671.

Any idea what they would be called? Don't have a copy of the BS7671 so can't go that route.

 

[ezekiel]

http://www.theiet.org/publishing/wiring-regulations/forms/

 

[david_uk]

You can download all of the forms here http://www.theiet.org/publishing/wiring-regulations/forms/

Sorry for asking this, but are you competent to sign off this installation? It's not simply a matter of filling in a form - you have to perform a specific sequence of tests using a meter that has a valid calibration certificate and so on. You also may need to prove competence if asked.

 

[Delinquent]

You can download all of the forms here http://www.theiet.org/publishing/wiring-regulations/forms/

Sorry for asking this, but are you competent to sign off this installation? It's not simply a matter of filling in a form - you have to perform a specific sequence of tests using a meter that has a valid calibration certificate and so on. You also may need to prove competence if asked.

It's a valid question

I'm competent to design and install it, not to test it, but as the saying goes I know a man who can. The forms have been requested as part of the proof of competence and will be checked, though it really is rudimentary stuff I'm doing (e.g. a new ring of 14 sockets in back to the box).

Thanks for the links!