Hello.
Never really had an oppertunity to wire this sort of thing before so though i would run it past you guys 1st!
Basically a starter for a 880w pump for a swimming pool. The intention is to use this switch to start/stop the pump with automatic start via timeclock. I have single phase supplying it. The following shows how i would think to wire it however i have no idea how to include the timeclock into this installation.
Perm Live = 1
Link out = 1-2
Link out = 2-3
Link out = 3-4
Link out = 4-5
Neutral = A1
Link out = A2-13 common to input start
Link out = 14-95 common to output start
Link out = 5-96 going through stop input and output
Live Output to pump = 6
Neutral = Not sure... Goes into A2 but comes out where?
I have no diagrams for this so slightly unsure.
if you guys could tell me where i am correct or wrong that would be great... any ideas how to bring the timeclock in for autostart? possibly i think something to do with 14 and 95???
carl
Never really had an oppertunity to wire this sort of thing before so though i would run it past you guys 1st!
Basically a starter for a 880w pump for a swimming pool. The intention is to use this switch to start/stop the pump with automatic start via timeclock. I have single phase supplying it. The following shows how i would think to wire it however i have no idea how to include the timeclock into this installation.
Perm Live = 1
Link out = 1-2
Link out = 2-3
Link out = 3-4
Link out = 4-5
Neutral = A1
Link out = A2-13 common to input start
Link out = 14-95 common to output start
Link out = 5-96 going through stop input and output
Live Output to pump = 6
Neutral = Not sure... Goes into A2 but comes out where?
I have no diagrams for this so slightly unsure.
if you guys could tell me where i am correct or wrong that would be great... any ideas how to bring the timeclock in for autostart? possibly i think something to do with 14 and 95???
carl