Hi Guys,
I am planing to lay a dedicated circuit for the above using a 10mm T&E cable. As part of my kitchen design, I am planning to situate all the FCU's for the integrated appliances (around 7) in a single wall unit (they will then run a socket to the appliance as the Load). I intend to include the double pole switch for the cooker in here too. This will be around 5 metres away from the Oven Connection Unit but I intend to run the 10mm cable between the double pole in the cupboard to the Oven Connection Unit too.
Does this sound okay and any feedback on my idea to locate all the FCU's in the cupboard.
I am planing to lay a dedicated circuit for the above using a 10mm T&E cable. As part of my kitchen design, I am planning to situate all the FCU's for the integrated appliances (around 7) in a single wall unit (they will then run a socket to the appliance as the Load). I intend to include the double pole switch for the cooker in here too. This will be around 5 metres away from the Oven Connection Unit but I intend to run the 10mm cable between the double pole in the cupboard to the Oven Connection Unit too.
Does this sound okay and any feedback on my idea to locate all the FCU's in the cupboard.