New Kitchen, new electric oven, gas hob. At the momement I have no cable to the kitchen for the use of oven as my old one was all gas. The new oven is a single fan assisted rated 2.5kw. The installation instructions says to connect it by means of an "all-pole disconnect switch with a minimum contact gap of 3mm". Can someone please tell me what this "all-pole disconnect switch" is as I was automatically just going to run a cooker circuit from the consumer unit via a double pole cooker unit. Am I right in thinking that I can run the new oven off the existing ring main circuit as the oven is only 2.5kw?
Thanks!!!
Thanks!!!