Galxy 2 12 keypad beeps every few seconds

[samk80]

Hi, I have moved to this flat which has a Galxy/ADT unit, I'm guseeing is G" serries II but to be sure this is whats printed on the panel : Galaxy 2 12 C012

so every now and then I had this intermittent beep which I use to resolve by entering the pin and clearing/viewing fault status.

This morning it has started again but I can't get it cleared. The faults are all RF battery low, which I replaced all on RFs, and RF Fail, and Telephone Fail.

I put the pin and view the faults but when press ESC I get the MASTER REST REQUIRED error.

It is a non monitored system,(out of contract), and ADT will only deal with the landlord who is living abroad!

I have a default engineer code, given to me by the landlord and the user code.

please help if you can, the beeping is driving me completely loopy!

 

[josh451]

Don't really do galaxy, but you need to clear the faults before the beeping will stop. You seem to have a wireless system, in need of some new batteries!

And by the sounds of things, you don't have the master manager code, just a user code.

Get a local company in to get it serviced and the codes changed. Check with the landlord as you shouldn't have to pay for this if it was in your contract

http://www.nsi.org.uk/?q=approved_company_finder
http://www.ssaib.info/SearchDistance.aspx

 

[Alarm]

I think it should be check with the landlord or his agent before you mess about with his equipment.

And you will not have a engineer code.

What you need is a master code.