N
namsag
DIA , Where you arrested by the fashion police just after the photo was taken.
Im a lumberjack and im ok
Im a lumberjack and im ok
notice i legged it before the camera came out
I think i'm with you, the OTHER 2 wires will be connected to other wires, the wire from the stat that doesn't have a wire going to it is the one the grey wire goes to.There's only 3 wires going in the the cyl stat check which colour is connected to 2.
If, they followed the Honeywell Y plan it would be terminal 7 in the wiring center, but not guarantee they did so best to check.
Not to me it doesn't,i'm getting a spark in.sounds right
Will do.......i'll also make sure he can unravel spaghetti aswell,it's a mess with all those cut off bits off wire & 4 wires going into one little connection.if you get a spark try and make sure he understands heating wiring
a lot don't
It's a mess mate,it really is like spaghetti,at least 6 different blocks with wires & cut off wires going into them.Why not post a pic of the wiring center
Replace it with a wiring centre and rewire as per the diagram posted earlier.It's a mess mate,it really is like spaghetti,at least 6 different blocks with wires & cut off wires going into them.
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local