Hi all i really hope you can helf or advise me of my problem , about 2 years ago i had a replacement combi fitted , i was advised by my plumber to have a Halstead Finest Gold , which i had fitted all was great untill the last 2 weeks lol , 1st if i turn the downstairs thermostat on for heating the pump runs but there is never any heat as the burner never ignites, to overcome this problem i have to turn the hot water on to start the burner after a few minutes then i turn the heating on and then turn the hot water off so the burner remains on for the heating, 2nd for some reason the system seems to be loosing pressure as on a regular dayley basis i have to re pressurise it to 1 1/2 bar as it drops to below 1 bar but every time i re pressurise it the overflow pipe leeks water outside the building , so if anybody out there has a simler problem or can suggest a fix i will be most gretefull hope to here from you soon
barry
barry