- Joined
- 30 Dec 2005
- Messages
- 1
- Reaction score
- 0
- Country
I have a Hotpoint wm64, the thing blew the breaker and then went dead. i have replaced the door switch and soldered a wire to replace a burnt out track on the circuit board. The washer then sprung to life, but the thing will not spin. I then changed the brushes on the motor but that hasn't changed anything. Can't find anything else wrong so it may be a call out job
_______________________
lynda, moderator
please read forum rules.
your post has been split
_______________________
lynda, moderator
please read forum rules.
your post has been split