Looking for advice on a Hotpoint WM83. What actually is the sequence of events when the machine has filled, what does it check next? With my machine, after filling,the motor kicks and then the house circuit breaker trips. This is with the heater control turned to "No Heat" I had everything to bits last week to renew the drum spider and drum bearings so I checked for shorts in the wiring but could find none. This fault was present before then. The old spider was broken in 3 places so I thought that the spider catching on the rear of the casing was putting a strain on the motor. Not so it seems, the fault lies elsewhere. So I really need to know the sequence of events that come after filling so I can continue with my fault checks.