how to reset a guardtec 300 series alarm ?

[regmc]

evening , i own a property with a guardtec 300 series alarm installed .
i letted it for a few years .
now it,s become empty .
the last 3 x tennants all no the alarm code !
any ideas what i do to put in a new code ?
kind regards
reg

 

[Alarm]

Enter old code.
Scroll to UC
Press Yes
Then 1
Enter new code and press Yes.
Do the same again.
Press 0

Job done.

Blimey if I got any better I could do alarms for a livin..................ahh I do

 

[regmc]

thanks for quick response ,
theres only numbers 0 - 9
and yes and no
on front panel ?

 

[Alarm]

Sorry assumed you had knowledge of system.

Eneter code and press NO until you come to UC.

 

[regmc]

thanks again
what u mean by uc
regards reg

 

[Alarm]

UC- is the menu to alter the code or codes.
User Code.

UC

Get it?

http://www.sentrysecurity.co.uk/manuals/Gardtec 370 User manual.pdf

 

[Denford1]

300 Series.

Enter user code , then press NO before entry time expires , then
press NO until the option you require is flashing , in your case PROGRAM ,
press YES , enter new code ,
press YES , enter code a second time ,
press YES then press 0 to leave program mode.

 

[Alarm]

Eneter code and press NO until you come to UC.

Or did I miss something?

 

[Denford1]

Yes , from the OPs first line , I would guess its a 300 series alarm panel , not the 370 , but notice how I don't try to belittle you .

 

[Alarm]

I do indeed.
Also notice I had and my error forgotten about the 300.
So old now.

So in all fairness, apperciate your restraint.

 

[regmc]

sorry chaps tryed that and still nothing
is there a helpline etc.. i could call ?
kind regards

 

[Alarm]

http://www.rokonet.com/newsite/dynamicdata/flash/350_User_Manual.pdf

And it is press NO until you get to the menu.

So code NO until Uc or the tamper light then user code number then the code YES then 0

What we have both done is to miss out a step.

Thats the link to the manual.