Any advise on this will be greatly appreciated
Since my boiler was repositioned from a back room to the loft it has picked up a fault during transit!
Mainly in the cold months butvery occasionally in the warmer months, when the thermostat clicks on and you hear the boiler start to wir before firing into life you hear the tick that fires it up.
Well the problem is it can tick and carry on ticking without firing so I have to shut the system off and on again and it will always fire up then.
A chap suggested it will be the PCB, which makes sense as a poor connection could be affected by temperature change.
My Corgi registered friend is just Qualified so hasn't come across something like this just yet, he also says the vavle thingy appears to be ok.
Just wanted to find out if anyone els has come across this before I Go for a new PCB?
Thanks in advance.
Since my boiler was repositioned from a back room to the loft it has picked up a fault during transit!
Mainly in the cold months butvery occasionally in the warmer months, when the thermostat clicks on and you hear the boiler start to wir before firing into life you hear the tick that fires it up.
Well the problem is it can tick and carry on ticking without firing so I have to shut the system off and on again and it will always fire up then.
A chap suggested it will be the PCB, which makes sense as a poor connection could be affected by temperature change.
My Corgi registered friend is just Qualified so hasn't come across something like this just yet, he also says the vavle thingy appears to be ok.
Just wanted to find out if anyone els has come across this before I Go for a new PCB?
Thanks in advance.